Thread the tube into the upper chute support counterclockwise. Tep 14: Secure the boot with a wing knob. Step 13:Slide the boot rod into the deck. Install the boot rod mount using two nuts and two bolts. Step 12: Prepare the chute for installation. Step 11: Place the bags on the hanger bracket. Step 10: Align the cover tabs with the chute support, slide the hinge pin in place. Step 9: Slide the left side into the upper chute support using the tabs. Step 8: Snap the upper chute support into place on the hanger assembly. Secure using two carriage bolts and two 1/2” lock nuts and washers. Step 7: Place hanger assembly onto the upright support bracket. Use hanger position “C”, secure using the carriage bolt and wing knob. Use the clevis bolt and hairpin clip to secure the bracket to the tractor. Place hooked ends of the mounting assembly over the shoulder bolts on the rear frame of the tractor. Use the two carriage bolts and the wing knobs to secure them. Use the holes furthest away from the rear hooks. Step 4: Flip over the assembly and mount the hitch support bracket. Attach the two side brackets to the rear attachment. Step 2: Start by laying out the parts of the double bagger. This helps ensure the machine doesn't start accidentally and cause you or those around you harm. Remove the ignition key, disconnect the spark plug ignition wire, and engage the parking brake. Turn the mower off and make sure the engine is cool. Place your mower on a flat, level surface. Step 1: Prepare your riding mower for maintenance.
Always be sure to check your operator's manual for detailed instructions. Depending on your model, the instructions in this video may vary slightly. The tools needed for installation include a 1/2 in. Touchpoint.initialize(4^90"FĞ_emU.The following video will show you how to install a double bagger on your riding mower.
A large pedal surface gives superior operator comfort.
0 kommentar(er)
